Salts, not only attack iron, wreak havoc on aluminum as well. If you use a premixed product, "water is supposed to be correct" OAT coolant costs much higher than the HOAT. Another significant factor that distinguishes these two coolants is the price. While the ideal runtime of HOAT is five years and 1000K miles, OAT lasts for ten years and 150K miles. The second difference in these is their lifetime. If it is filled with another brand, which contains other acids, the anticorrosive properties are diluted, not the refrigerants / antifreezeĪnd all the more important to achieve 100% effectiveness of the anticorrosive properties is the "water" you use for the mixture (completely demineralized / deionized). While OAT is purple, HOAT comes in Orange. HOAT coolants like the light yellow Motorcraft Gold have lifespans similar to those of OAT coolants. Each succeeding refill will last for 60,000 miles or five years. And as I said before, that different factories use different acids, if you have to refill, it should always be done with the same product (which are the same color, does not mean that it is the same). Factory-filled OAT coolants like the Motorcraft Orange can last for 100,000 miles or ten years. You just have to change it regularly: inorganic (1-2 years), organic (2-3years). In conclusion, any refrigerant / antifreeze, of recognized brand, organic / inorganic, in the correct proportion and being the pressurized circuit, are doing well. One of the easier rules to remember is that you can not mix IAT and OAT coolants OATs should stay OAT only, and IAT needs to stay exclusively IAT. Another problem that usually exists, is that each manufacturer uses different types of organic acids, and the test strips are different for each manufacturer, so if you measure the level of acid and who measures it, it does not have the test strips of the brand of liquid, probably wrong measurements. Common HOAT Coolant Formulas: G05 Chrysler: MS-9769 Mercedes-Benz: DBL 7700.20 .0 John Deere: JDM H 24 Leyland: BLS.22.AF.01. Generally that small container only with acids and glycoles, you don't find it anywhere. What manufacturers recommend is to regularly measure the levels of acid / glycols in the liquid, and here is where there is a difference between organic and inorganic products and it is that organic manufacturers also offer you in a small container the additives to replace them depending on the samples, without the need to change all the cooling liquid. If the label says "refrigerant" does not mean that it will work "colder", it means that in the correct proportion, the liquid will boil above 100 C. Two types of degradation: 1) from acids (organic or inorganic), which protect you from corrosion, 2) from glycols, which protect you from boiling / freezing. Hybrid organic acid technology (HOAT) is not compatible with OAT or NOAT coolants. Click to expand.The fact that it is organic does not mean that it does not degrade over time.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |